NPUA Radio Instructions

• Guide To Your Refcom Bundle
• Linked Start-Up – Use This First!
• Reset
• Charging

Guide To Your Refcom Bundle

Linked Start-Up – Use This First!

1. All radios: hold down Power On until LEDs flash blue
2. Radio 1: quickly press and release A to enter intercom mode.
   • 3x: when Radio 1 pulses red, Radio 2 pulses purple, and Radio 3 pulses blue, you're ready!
3. If this doesn't work, time to Reset

Reset

1. All radios: hold down Power On until LEDs pulse blue
2. All radios: hold down – and + until LEDs flash red
3. All radios: Power Off
4. All radios: hold down Power On until LEDs pulse blue
5. Hold down A on Radio 1 while simultaneously holding down B of Radio 2 until both LEDs flash red and blue
6. Radio 1: quickly press and release A and wait for LEDs to pulse blue
7. Hold down A on Radio 2 and while simultaneously holding down B of Radio 3 until both flash red and blue
8. Radio 2: quickly press and release A and wait for LEDs to pulse blue
9. Radio 1: quickly press and release A to enter intercom mode. When Radio 1 LED pulses red, Radio 2 pulses purple, and Radio 3 pulses blue, you're ready!
10. After use, all radios: Power Off and use Linked Set Start-Up next time 💪

Charging

A full charge should last 6-7 hours. Charge using the supplied USB–3.5mm cable, plugging into a PC USB port, car or wall charger.

You may wish to use a dedicated wall charger or USB-C powered port.

Charging should take 1-2 hours and the LED will show red and turn off when fully charged.

Do not leave the radios for more than 6 weeks between use and charge as this can damage the rechargeable battery.