Refcom Instructions

Use Paired/Linked Start-Up with a new radio set or one that you previous had linked correctly. If it ain't broke, don't Reset and Repair it!

• 2-Way Paired Start-Up
• 3-Way Linked Start-Up
• 4-Way Linked Start-Up
• 2-Way Reset and Repair
• 3-Way Reset and Repair
• 4-Way Reset and Repair
• Charging

2-Way Paired Start-Up

1. Radio A + B: press and hold Power On until LEDs flash blue
2. Radio A: press A twice to enter intercom mode. When Radio A LED pulses red and Radio B pulses blue, you're ready!
3. If this doesn't work, time to Reset and Repair

3-Way Linked Start-Up

1. Radios A + B + C: press and hold Power On until LEDs flash blue
2. Radio A: press A twice. When Radio A pulses red, Radio B pulses purple, and Radio C pulses blue, you're ready!
3. If this doesn't work, time to Reset and Repair

4-Way Linked Start-Up

1. Radios A + B + C + D: press and hold Power On until LEDs flash blue
2. Radio A: press A twice. When Radio A LED pulses red, Radio B and C pulse purple, and Radio D pulses blue, you're ready!
3. If this doesn't work, time to Reset and Repair

2-Way Reset and Repair

1. Radios A+B: press and hold Power On until LEDs pulse blue
2. Radios A+B: press and hold – and + until LEDs flash red
3. Radios A+B: Power Off
4. Radios A+B: press and hold Power On until LEDs pulse blue
5. Press and hold A on Radio A and press and hold B of Radio B until both LEDs flash red and blue
6. Radio A: press and release A and wait for LEDs to pulse blue
7. Radio A: press A for 2s and release to enter intercom mode. When Radio A LED pulses red and Radio B pulses blue, you're ready!

3-Way Reset and Repair

1. Follow 2-Way Reset and Repair steps 1-7
2. Radio C: press and hold – and + until LEDs flash red
3. Radios B+C: Power Off
4. Radios B+C: press and hold Power On until both pulse blue
5. Press and hold A on Radio B and press and hold B of Radio C until both flash red and blue
6. Radio B: press and release A and wait for LEDs to pulse blue
7. Radio B: press A and release to enter intercom mode, Radio B will pulse red and Radio B blue
8. Radio A: press and release A to enter intercom mode. When Radio A LED pulses red, Radio B pulses purple, and Radio C pulses blue, you're ready!

4-Way Reset and Repair

1. Follow 3-Way Reset and Repair steps 1-7
2. Radio C: Power Off
3. Radios C + D: press and hold Power On until both pulse blue
4. Press and hold A on Radio C and press and hold B of Radio D until both flash red and blue
5. Radio C: press and release A and wait for Radio C and D to pulse blue
6. Radio C: press and release A to enter intercom mode, wait until Radio C pulses red and Radio B pulses blue (repeat if needed)
7. Radio A: press and release A to enter intercom mode. When Radio A LED pulses red, Radios B + C pulse purple, and Radio D pulses blue, you're ready!

Charging

A full charge should last 6-7 hours. Charge using the supplied USB–3.5mm cable, plugging into a PC USB port, car or wall charger.  

Charging should take 1-2 hours and the LED will show red and turn off when fully charged.

Do not leave the radios for more than 6 weeks between use and charge as this can damage the rechargeable battery.